# 13.4 Status details and settings option

The top right-hand corner of the flyview appears as follows: 

<figure><img src="/files/HPGplUWToVC9DGLdGFUN" alt=""><figcaption><p>flyview top bar</p></figcaption></figure>

1. **Pump Rate**: the value of the pump rate can be changed by using a slide bar during the flight. This indicates the spraying rate. The pump rate is always considered in percentage. This pump rate can be adjusted during the flight. This will be helpful to adjust the volume of spraying depending on the requirements of the crop.
2. **Battery Status**: Battery voltage is continuously displayed for user monitoring and action if it drops below the threshold.
3. **RC Signal**: Displays RC signal strength.
4. **Battery Consumption**: It displays the current in amperes and the battery consumed in milliampere-hours (mAh).
5. **Satellite**: Displays the count of connected satellites. With hdop value.
6. **Drone Status**: This shows the status and mode of the drone.
7. **Three Dots**: To access the cloud, notification, and RPA settings, click on the three dots in the image above.

<figure><img src="/files/sMPzeIbH2Pk9N7lBadka" alt=""><figcaption><p>Options</p></figcaption></figure>

The Screen shows the following information

1. <img src="/files/gm3ZD3ZC9wzWfiqiS23C" alt="" data-size="original"> **Team Member Name**: Shows the name of the team member who is the account holder and is currently logged in.
2. <img src="/files/chknV5InesZtGJ40nwiC" alt="" data-size="line"> **Cloud Sync Option**: Tap to synchronize with the cloud.
3. <img src="/files/wjTt1zTePHJ7h7gGBbS5" alt="" data-size="line"> **Notifications**: Click here to access all notifications.
4. <img src="/files/Z9ryISPtR7dEEjSVHTyw" alt="" data-size="line"> **Drone Connection**: This icon turns green when the drone is connected.
5. <img src="/files/4vOsnxjGkl83Dr7o55oI" alt="" data-size="line"> **Settings**: Access RPA settings.


---

# Agent Instructions: Querying This Documentation

If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question.

Perform an HTTP GET request on the current page URL with the `ask` query parameter:

```
GET https://aerogcs-green-docs.aeromegh.com/13.-flyview/13.4-status-details-and-settings-option.md?ask=<question>
```

The question should be specific, self-contained, and written in natural language.
The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.