AeroGCS GREEN
  • AeroGCS GREEN User Manual
  • 1. Introduction
  • 2. System Requirements
  • 3. Getting Started
    • 3.1 Installing AeroGCS GREEN
    • 3.2 Activating AeroGCS GREEN
    • 3.3 Updating AeroGCS GREEN
      • 1. Play Store Update: The Classic Method
      • 2. Inline Update: Update on the Go!
  • 4. Dashboard
  • 5. Home Menu
  • 6. Projects
    • 6.1 Create a New Project
      • 6.1.1 Automatic Flying Method
      • 6.1.2 Manual Flying Method
    • 6.2 Handling Existing Project
      • 6.2.1 Open existing project
      • 6.2.2. Edit a Plan
      • 6.2.3 View and Edit the Plan Report
      • 6.2.4. Edit a plot
      • 6.2.5 Add a plot to the existing project
      • 6.2.6 Download Plot and Plan
      • 6.2.7 Delete a Project
        • 1: Not Logged in to AeroGCS Enterprise
        • 2: Logged in to AeroGCS Enterprise
  • 7. Connecting a Drone
    • 7.1. Using Serial Port
    • 7.2 Using TCP
    • 7.3 Using UDP
    • 7.4. Using Bluetooth
    • 7.5 Using H12
    • 7.6 Drone Registration
  • 8. RPA Settings
    • 8.1 Aircraft Settings
    • 8.2 Spraying system:
      • 8.2.1 Spray testing
      • 8.2.2 Spraying Parameters
      • 8.2.3 Clear Trapped Air
      • 8.2.4 Set Spray Tank Level
      • 8.2.5 Empty Threshold Action
      • 8.2.6 Flow Meter Error Alert
      • 8.2.7 Calibrate Pump Flow
      • 8.2.8 Calibrate Flow Meter
      • 8.2.9 Restore flow Meter to Factory Setting
    • 8.3 Remote Controller Settings
      • 8.3.1. Radio calibration
      • 8.3.2. Channel Monitor
      • 8.3.3. Advance Settings
    • 8.4 Compass Calibration Settings
      • 8.4.1. Compass
      • 8.4.2. Large Vehicle Calibration:
    • 8.5 IMU Calibration Settings
      • 8.5.1 Accelerometer Calibration:
      • 8.5.2 Level Horizon Sensor Calibration
      • 8.5.3 Barometer Calibration:
    • 8.6 Camera Settings
    • 8.7 General Settings
    • 8.8 AeroMegh / Enterprise Account
      • 8.8.1. Login:
      • 8.8.2. Account Details
  • 9. Field Plotting
    • 9.1. RC/Mobile:
    • 9.2. Drone
    • 9.3. Map
    • 9.4. Import KML
  • 10. Mission Planning
    • 10.1 Parameters
    • 10.2 Adjust Waypoint
    • 10.3 Adjust Spacing
    • 10.4 Indentation
    • 10.5 Obstacle Boundary
    • 10.6 Route Adjust
    • 10.7 Move Plan
    • 10.8 Plan Splitting
  • 11. Obstacle Avoidance
    • 11.1 Polygon Type Obstacle
    • 11.2 Circle Type Obstacles
    • 11.3 Edit Obstacles
    • 11.4 Delete Obstacle
  • 12. Flyview
    • 12.1 Flight Controls
    • 12.2 Flight Details
    • 12.3 Spray Rate Dosage Calculation
    • 12.4 Status details and settings option
    • 12.5 Range Finder
    • 12.6 Notifications
    • 12.7 Arm and Disarm Navigation Bar
  • 13. Report Generation
    • 13.1. View Report
    • 13.2. Generate Field Report
  • 14. Managing data
  • 15. Creating AeroGCS Enterprise Account
  • 16. Troubleshooting
Powered by GitBook
On this page

Was this helpful?

  1. 10. Mission Planning

10.5 Obstacle Boundary

Previous10.4 IndentationNext10.6 Route Adjust

Last updated 4 months ago

Was this helpful?

To adjust the plan's obstacle boundary, select "Obstacle Boundary" from the menu, which will display the following image for making adjustments:

On the left side of the screen, you’ll see the Obstacle Boundary panel, which allows you to adjust the spacing between obstacles and the spray plan boundary. To modify the obstacle boundary:

  1. Set Spacing: Adjust the spacing by using the slider or the "-" and "+" buttons. The available range is from 0 meters to 10 meters.

  2. Confirm Spacing: Tap "OK" to apply the changes after setting your desired spacing.

This spacing adjustment ensures that the spraying operation avoids the designated obstacle area, helping to protect nearby objects or sensitive zones.

Obstacle boundary