AeroGCS GREEN
  • AeroGCS GREEN User Manual
  • 1. Introduction
  • 2. System Requirements
  • 3. Getting Started
    • 3.1 Installing AeroGCS GREEN
    • 3.2 Activating AeroGCS GREEN
    • 3.3 Updating AeroGCS GREEN
      • 1. Play Store Update: The Classic Method
      • 2. Inline Update: Update on the Go!
  • 4. Dashboard
  • 5. Home Menu
  • 6. Projects
    • 6.1 Create a New Project
      • 6.1.1 Automatic Flying Method
      • 6.1.2 Manual Flying Method
    • 6.2 Handling Existing Project
      • 6.2.1 Open existing project
      • 6.2.2. Edit a Plan
      • 6.2.3 View and Edit the Plan Report
      • 6.2.4. Edit a plot
      • 6.2.5 Add a plot to the existing project
      • 6.2.6 Download Plot and Plan
      • 6.2.7 Delete a Project
        • 1: Not Logged in to AeroGCS Enterprise
        • 2: Logged in to AeroGCS Enterprise
  • 7. Connecting a Drone
    • 7.1. Using Serial Port
    • 7.2 Using TCP
    • 7.3 Using UDP
    • 7.4. Using Bluetooth
    • 7.5 Using H12
    • 7.6 Drone Registration
  • 8. RPA Settings
    • 8.1 Aircraft Settings
    • 8.2 Spraying system:
      • 8.2.1 Spray testing
      • 8.2.2 Spraying Parameters
      • 8.2.3 Clear Trapped Air
      • 8.2.4 Set Spray Tank Level
      • 8.2.5 Empty Threshold Action
      • 8.2.6 Flow Meter Error Alert
      • 8.2.7 Calibrate Pump Flow
      • 8.2.8 Calibrate Flow Meter
      • 8.2.9 Restore flow Meter to Factory Setting
    • 8.3 Remote Controller Settings
      • 8.3.1. Radio calibration
      • 8.3.2. Channel Monitor
      • 8.3.3. Advance Settings
    • 8.4 Compass Calibration Settings
      • 8.4.1. Compass
      • 8.4.2. Large Vehicle Calibration:
    • 8.5 IMU Calibration Settings
      • 8.5.1 Accelerometer Calibration:
      • 8.5.2 Level Horizon Sensor Calibration
      • 8.5.3 Barometer Calibration:
    • 8.6 Camera Settings
    • 8.7 General Settings
    • 8.8 AeroMegh / Enterprise Account
      • 8.8.1. Login:
      • 8.8.2. Account Details
  • 9. Field Plotting
    • 9.1. RC/Mobile:
    • 9.2. Drone
    • 9.3. Map
    • 9.4. Import KML
  • 10. Mission Planning
    • 10.1 Parameters
    • 10.2 Adjust Waypoint
    • 10.3 Adjust Spacing
    • 10.4 Indentation
    • 10.5 Obstacle Boundary
    • 10.6 Route Adjust
    • 10.7 Move Plan
    • 10.8 Plan Splitting
  • 11. Obstacle Avoidance
    • 11.1 Polygon Type Obstacle
    • 11.2 Circle Type Obstacles
    • 11.3 Edit Obstacles
    • 11.4 Delete Obstacle
  • 12. Flyview
    • 12.1 Flight Controls
    • 12.2 Flight Details
    • 12.3 Spray Rate Dosage Calculation
    • 12.4 Status details and settings option
    • 12.5 Range Finder
    • 12.6 Notifications
    • 12.7 Arm and Disarm Navigation Bar
  • 13. Report Generation
    • 13.1. View Report
    • 13.2. Generate Field Report
  • 14. Managing data
  • 15. Creating AeroGCS Enterprise Account
  • 16. Troubleshooting
Powered by GitBook
On this page

Was this helpful?

  1. 12. Flyview

12.4 Status details and settings option

Previous12.3 Spray Rate Dosage CalculationNext12.5 Range Finder

Last updated 6 months ago

Was this helpful?

The top right-hand corner of the flyview appears as follows:

  1. Pump Rate: the value of the pump rate can be changed by using a slide bar during the flight. This indicates the spraying rate. The pump rate is always considered in percentage. This pump rate can be adjusted during the flight. This will be helpful to adjust the volume of spraying depending on the requirements of the crop.

  2. Battery Status: Battery voltage is continuously displayed for user monitoring and action if it drops below the threshold.

  3. RC Signal: Displays RC signal strength.

  4. Battery Consumption: It displays the current in amperes and the battery consumed in milliampere-hours (mAh).

  5. Satellite: Displays the count of connected satellites. With hdop value.

  6. Drone Status: This shows the status and mode of the drone.

  7. Three Dots: To access the cloud, notification, and RPA settings, click on the three dots in the image above.

The Screen shows the following information

Team Member Name: Shows the name of the team member who is the account holder and is currently logged in.

Cloud Sync Option: Tap to synchronize with the cloud.

Notifications: Click here to access all notifications.

Drone Connection: This icon turns green when the drone is connected.

Settings: Access RPA settings.

flyview top bar
Options