12.1 Flight Controls
Last updated
Was this helpful?
Last updated
Was this helpful?
To the left-hand side of the screen, users will find buttons essential for controlling the flight, including:
To operate the drone, users should click this button. Upon selecting it, automatic pre-flight checks will be performed. Within AeroGCS GREEN, users can also adjust parameters such as Speed, Altitude, and spray volume, as illustrated in the image below.
Edit parameters, upload the plan, and proceed to fly. After adjusting parameters, automatic preflight checks are indicated by a popup window.
Flight checks include motor testing, battery level assessment, device mode confirmation, and GPS satellite count verification. Successful completion of these checks prepares the drone for flight.
Experience effortless flight initiation and real-time features like live tracking and streaming with AeroGCS Enterprise. Unlock the full potential with a valid subscription for seamless and immersive drone flying.
Start Flight:
Live Features: Upon initiating the flight, users will be notified with the message "Drone is Live. Live Tracking is on and streaming has been started," indicating that real-time features are now active:
Live Tracking: Monitor the precise location of your drone throughout its flight path on a map within AeroGCS Enterprise.
Live Streaming: Gain a real-time visual perspective of your surroundings directly from the drone's camera feed.
📝 Note: The LIVE button on the Fly View screen will be inactive 🚫 once the drone is armed and will remain so until the drone is disarmed. This ensures continuous, uninterrupted live streaming during the flight.
Subscription Requirement: To take full advantage of these live features and experience the following, a valid AeroGCS Enterprise subscription is required:
Track the Flight Live on AeroGCS Enterprise: Monitor your drone's real-time location on a detailed map within the AeroGCS Enterprise platform.
See Live Video Streaming from the Drone Camera: Gain an immersive perspective of your surroundings directly from the drone's camera feed as it flies.
Once you initiate the flight by swiping right, the following automated actions occur:
Altitude Ascent: The drone will elevate to the predetermined altitude you specified before take-off.
Speed Configuration: The drone will configure itself to operate at the pre-set speed you established for the designated altitude.
This section details how to initiate a live stream and record video locally on your device before takeoff using AeroGCS GREEN.
Benefits:
Capture pre-flight footage of the surrounding area.
Monitor wind conditions or potential obstacles from the drone's camera perspective.
Ensure data capture even with slow internet connectivity.
Locate "LIVE" Button: Identify the dedicated "LIVE" button within the Flyview interface.
Click to Activate: Press the "LIVE" button before initiating takeoff.
Internet Speed Check: The system will automatically assess your device's internet connection speed. This ensures:
Optimal Streaming Quality: A strong internet connection is crucial for smooth and clear live video transmission (if applicable to your model).
Effective Tracking Performance: Reliable internet speed allows for accurate and consistent tracking of your drone's location on AeroGCS Enterprise (if you have a valid subscription).
"Slow Internet" Notification: If the internet speed is insufficient, AeroGCS GREEN will display a notification "Slow Internet."
Local Video Recording: Regardless of internet speed, the system will diligently record the video locally on your device. This ensures no crucial footage is lost.
Uploading Recorded Videos : Oce a reliable high-speed internet connection becomes available, you can manually synchronize and upload the locally recorded video to AeroGCS Enterprise for comprehensive data storage and analysis.
The flight commences by elevating the altitude to the specified level, configuring the drone to operate at the predetermined speed at the designated altitude.
This feature permits users to abort the flight in emergencies and return the drone to its initial launch position. This symbol serves as a secure means to land the drone back at the launch point, and selecting it triggers an automatic return to the launch position.
This option enables the pausing of the flight mission due to unforeseen circumstances. A specific location, marked as 'R' as depicted in the image below, will be used for subsequent actions, and the drone will be safely landed at that designated position.
This option permits users to resume the previous flight from the 'R' marked point in the plan, reducing drone travel distance and preventing mission plan repetition. Choosing the 'Edit' option will erase the resume marker, causing the mission to start from the initial position, increasing time, and repeated spraying in the same area.
Swipe Right to Begin: Effortlessly initiate your drone flight with a simple swipe to the right on the control interface. As shown
